Best Pwm Charge Controller

Best Pwm Charge Controller

Product name:PWM solar charge controller 60A
Model No.:CL48- 60DU
Working principle:PWM Solar Charge Controller is a photovoltaic (PV) charge controller that tracks the PV array to deliver the available current for charging batteries. When charging, the Controller regulates battery voltage and output current based on the amount of energy available from the PV array and state-of-charge of the battery.

Details

60A pwm charge controller information

High efficiency manual best pwm charge controller 60A 

Our CL series is a kind of intelligent, multi-purpose solar charge and discharge controller.

The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements. 

Technical Data for CL 60a pwm charge controller

image019.jpg

Model

CL48-60DU

Input

PV input voltage

≤100V

Rated charge current

60A

Output

System voltage

48V

Battery over-voltage protection voltage

16.00V×1/×2/×3/×4 (0.5V differents)

Rated discharge current

60A

Self-consumption

≤16mA

Charge loop voltage drop

≤0.29V

Discharge loop voltage drop

≤ 0.1V

Charging mode

PWM 4 stages (bulk, absorption,float,equalized)

Float Charge Voltage

13.8(13V~15V)×1/×2/×3/×4

Absorption charge voltage

14.4V(13V~15V) ×1/×2/×3/×4

Duration of Absorption Charge

2h

Voltage of equalized charging *

14.6V(13V~15.5V) ×1/×2/×3/×4

Duration of equalized charging

2h

Low voltage disconnection

10.7V(10V~14V) ×1/×2/×3/×4

Low voltage reconnection

12.6V(10V~14V) ×1/×2/×3/×4

Load working mode

Regular control mode,Light control with switch-off point at night and switch-on point before dawn,Light control mode

Light control voltage

5V(1V~10V) ×1/×2/×3/×4

Battery type

GEL,SLD,FLD

USr(default)

Other

Interface

LCD,2 buttons

Wiring

PCB terminal, ≤25mm2

Working temperature

-20 ~ +55 °C

Storage temperature

-30 ~ +65 °C

Working humidity

10% ~ 90%, no condensation

Dimension

535*415*190mm

Weight

500g

IP code

IP30

Optional function

Remote communication,TTL, standard ModBus protocol

Connection diagram

                       

About 60 amps pwm charge controller

• Automatic identification system voltage, 12/24V auto recoginition or 48V

• Humanized LCD displaying and two buttons operation of man-machine interface.

• Completed technical data for setup and modify.

• High efficiency intelligent PWM 4 stage charging.

• The load control mode can be selected, the timer function can be reset for street light at night.

• Discharge counter of Ampere hour.

• Reliable over voltage protection, short circuit protection,over load protection, over charge protection, over-discharge protection.

Application for solar charge controller

Our Advantage

Our factory


Our market

Certification

FAQ

Q: What's A PWM solar charge controller ?

A PWM solar charge controller stands for “Pulse Width Modulation”. These operate by making a connection directly from the solar array to the battery bank. During bulk charging, when there is a continuous connection from the array to the battery bank, the array output voltage is ‘pulled down’ to the battery voltage. As the battery charges, the voltage of the battery rises, so the voltage output of the solar panel rises as well, using more of the solar power as it charges. As a result, you need to make sure you match the nominal voltage of the solar array with the voltage of the battery bank. *Note that when we refer to a 12V solar panel, that means a panel that is designed to work with a 12V battery. The actual voltage of a 12V solar panel, when connected to a load, is close to 18 Vmp (Volts at maximum power). This is because a higher voltage source is required to charge a battery. If the battery and solar panel both started at the same voltage, the battery would not charge.

Q: Can I get one for sample?

A:Yes, we accept sample order or trial order for testing first.

Q: What's the price and MOQ?

A:Please just send me inquiry, your inquiry will be replied within 24 hours, we will let you know the latest price and MOQ.

Q: What's you delivery time?

A:It depends on your quantity, but usually, 7-15days for sample order, 30-45days for batch order


Hot Tags: best pwm charge controller, China, manufacturers, suppliers, factory, wholesale

Feedback

Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions, sales events, pre-order sales & more!
Connect with Solarway
Become our fan, follow us & subscribe for the latest updates and deals
QR Code
  • About Us
  • Product
  • News
  • Knowledge
  • Contact Us
  • Copyright © Jiaxing Solarway New Energy Co.,Ltd All Rights Reserved.